[Steam type light exhaust pipe radiator] The steam type light exhaust pipe radiator produced by Hebei Chunbo Heating Company is a standard type of heat dissipation exhaust pipe, suitable for steam heating systems, because its inlet and outlet water joints are separated on both sides of the exhaust pipe. side, so curved tubes are used to eliminate stress caused by thermal expansion and other reasons. The heat dissipation pipes have various combinations of different surface tube lengths, tube rows, and fin pitches, with nearly a hundred sizes and specifications. Product attributes are mainly used in industrial factory heating systems. They are connected by high-quality seamless steel pipes. They are easy to operate and can provide sufficient heat supply. It is the main equipment in the heat exchanger device that uses hot and cold media to cool or heat the air. The air can be heated by high-temperature water, steam or high-temperature heat transfer oil, and the air can be cooled by salt water or low-temperature water. Other explanations: It is widely used in hot air heating, air conditioning, cooling, condensation, dehumidification and drying projects in light industry, construction, chemical industry, machinery, textile, printing and dyeing, electronics, food, starch, medicine, metallurgy, coating, mineral drying equipment and other industries. The radiator uses steam or hot water as the heat medium. The working pressure of steam is catties/cm2, and the temperature of hot water can be at. Transaction Description Large manufacturer, quality assurance, reasonable price. Free delivery for orders within the same city or above. For out-of-town customers, our company will handle the consignment, and the freight will be borne by the customer themselves. Optical exhaust pipe radiator Industrial optical exhaust pipe production expert, large heat dissipation, good heat dissipation effect, long service life, wide application range, convenient and fast installation, welcome to the factory for inspection and guidance, warranty, lifetime maintenance, technical standards for radiators, radiator materials should comply with the regulations, water pipes The thickness of the radiator should be tested for water vapor pressure in groups. The pressure-bearing capacity is not less than that of the radiator. The inlet and outlet pipes are set under the radiator. There are no inlet and outlet pipes on the side. The center distance between the inlet and outlet pipes is , and the error is not greater than. The radiator is a high-quality cold-rolled low-carbon steel pipe radiator. The room is a double-lap type of elliptical tube. The water aperture must reach mm. There should be no less than one uniform, dense acid-resistant, alkali-resistant, high-temperature-resistant and oxygen-blocking protective layer inside the radiator tube, and an inner layer must be provided. Cavity protective layer construction technology practices and test reports. The threads of the radiator pipe interface should comply with the regulations of /, the threads should be ensured to be intact and without defects, and the connecting pipe threads should have protective caps. Each group of radiators is set to operate manually. The welding of radiators should comply with the regulations of /, the welds should be straight, uniform, neat and beautiful, and there should be no defects such as cracks, pores, incomplete penetration and burn-through. The spot welding spots should be even, the distance between adjacent welding spots should not be greater than 1, and there should be no welding spots. Defects such as burn through. The heat pipe and water pipe must be welded together firmly.
Factory exhaust gas heating has always been the ideal of business owners, and it is also a good way to save energy and environmentally friendly waste. However, a good radiator has never been found. Cast iron radiators are durable but not pressure-resistant, while steel radiators are pressure-resistant. But if it is not durable, the steam light exhaust pipe radiator launched by Chunye Company is a good choice. Industrial fin radiator is a kind of radiator developed by the radiator industry in recent years. It is a kind of radiator with high heat dissipation efficiency, high pressure bearing and high energy saving. It is composed of fin tubes and light tubes inserted and welded together. Its specifications and models are divided into different categories. , mainly used in large-scale greenhouses and office integrated workshops. Due to its thick pipe diameter, large water capacity, high heat dissipation, and good heat conduction effect of the peripheral fins, it is several times or even dozens of times the heat dissipation of ordinary radiators, which can greatly reduce the cost. Saving money, it is an ideal choice for heating in many industries.
On the basis of the original good heat dissipation effect of industrial finned tubes, our company has developed a new type of industrial finned tube that does not use the old-fashioned baffle as the head, but replaces it with a light pipe that is larger than the radiator main pipe. It not only improves the heat dissipation effect again based on the quantity, but the key is that the pressure-bearing capacity of the radiator is increased, the diameter of the radiator pipe is relatively thick, and the instantaneous pressure of the water supply pressure test is large, avoiding the many phenomena of the old-fashioned baffle head bursting. .
With the rapid development of high technology, the radiator radiator industry has also undergone great changes. It is no longer the clumsy cast iron radiator before, and the heat dissipation effect is not ideal, not to mention the high cost, and the process is particularly cumbersome. The casting process causes great harm to environmental pollution. In recent years, steel-aluminum composite radiators, steel column radiators, and surface electrostatic spray radiators have developed rapidly and are very popular. They are economical in price, beautiful in appearance, and have a long service life. And environmentally friendly, it has achieved three benefits with today's high quality of life: heating, beauty, and environmental protection. The heating of large workshops, mining areas, and factory buildings has also been increasingly replaced with the development of radiators. The ones originally installed in workshops The string fins replace the current fins, eliminating many processes such as miscellaneous fins and fin transfer. The light pipe is directly wound to form a finned tube. The original cast iron sheet is replaced with a light exhaust pipe radiator, which not only greatly improves the power , and it is very convenient to use and install, and it is the lowest price of cast iron sheet.
The industrial fin tube radiator has large diameter, wide water channel, large flow rate, efficient heat dissipation and energy saving, and can effectively recover the waste heat and exhaust gas of the factory. It is the best choice for heating industrial workshops!
Steam type light exhaust pipe radiator Jizhou large manufacturer quality assurance and reasonable price